A solution to my blocked sink problem

A solution to my blocked sink problem

I have a blocked sink what can I do to unblock it? Here is A solution to my blocked sink problem.

The first option and usually the most cost effective method when you notice that you have a blocked sink is to try using a plunger or, pour some Mr Muscle down the sink .If this method doesn’t work, then the best course of action is calling a plumber, as the first thing they will do is to remove the U bend and see if there is a blockage. If there is a blockage then this can be simply removed with a screwdriver or a similar tool, once this has been done then the plumber will reassemble the U bend without the need to use PTFE tape to seal the joints and retest the sink. If you still got a blockage and the method of taking out the U bend hasn’t work, then the next part is to look in the waste pipe itself.

What this mean is the plumber will a special plumbing tools called a worm. This is used to send down the waste pipe to break up and clear any blockages within the waste pipe. This saves time from having to cut into the pipework and removing the blocked pipe.  If the water still refuses to flow down the sink, then you might be having a blocked drains and often this will cost you extra money to sort out this problem. The reason for this is that in most cases the plumber will need to use a drain jetting machine to blast out the blockage.

What can I do to prevent my sink from becoming blocked again?

A good way in preventing your sink from blocking up again is to fit a strainer over the sink hole. This will collect any unwanted food and waste from going down the drainage system. If you allow food and oils to go down the sink, it causes a layer or build up of gunge over time across the internal span of the pipe. As time passes on the pipe will become narrower and narrower, till eventually it will become blocked completely. The idea is to use the sink as normal, and any food that falls into the sink will collect over the sink hole in the strainer. Most modern sinks these days will come with a basket strainer that is built into the plug hole.

Share This:

winter months

Beware of Plumbing Trouble in the Winter Months

The winter months are particularly difficult for the well-being of the house. What can happen is the structure can be stressed by the freeze-thaw pattern, and it also the systems are more prone to fail.

Any plumbing problem is often due to frozen plumbing pipes or from the pipes bursting, if this occurs then call in a plumber right away.

How to know if you have frozen pipe? Since most frozen pipes are located outside, it isn’t always easy to notice when it does freezes up.
If you notice a decrease in pressure or flow from one of your faucets, you might have partial freeze in one of your pipes. Don’t just assume this will get better – a partial freeze will almost always turn to a total freeze if left unattended.

What happen is the pressure from the expanding ice puts onto the pipes is easily enough to break the pipes entirely If it left to build for a long time.

The plumber will be able to track down the frozen spot and will have the equipment needed to relieve the condition; also they might give you tips on how to insulate your pipes better in order to avoid a refreeze in the future.

With any luck, winter will come and go without your house being any worse for the wear. To that end, you can check on the insulation of your pipes before the cold season and add protection if you find any exposed spots. However, you might be in a situation where it is too late and the pipes are already freezing. In that case, call an emergency plumber as soon as possible to get the problem taken care of. Every minute you wait is a minute closer you get to a major plumbing disaster. Act fast and put your trust in the hands of the professionals – you will be glad you did.

Share This:

Plumbing Problems In The Kitchen

Plumbing Problems in the Kitchen

The most common area in the home that is likely to have plumbing issue is in the kitchen, this is mainly due to the facts that it appliances is used so often every day. When you do get Plumbing Problems In The Kitchen it could very likely be related to the trash disposal units, or a leaking drain basket or even leaky faucets.

What can often be the case is that the problem could very well be an in-depth issue that only a plumber can resolved.The most common plumbing problem in the kitchen occurs at the:

Kitchen faucets:
If you are experiencing difficulties with a blocked or leaky faucet at the kitchen sink, the first thing that might need examining is the aerator area which is where the water comes out. It might be possible to check running water without the aerator in place, but if the faucet continue to drip and you are not confident to do in-depth examination. Then a phone call to a plumber might be the best option.

Kitchen drains:
The most common problem that occurred with your kitchen sink is a blocked drain, particularly if you have garbage disposal units. A lot of the time with your disposal unit when it gets blocked is that food is caught up and stuck in the pipe work beneath the sink. If you do get this issue with a blocked drain, then try to flush it with boiling water or vinegar.

Kitchen Dishwater:
A big issue when it comes to plumbing problems in the kitchen is louder – then normal noisy dishwaters. This is typically caused by a faulty part where something has comes loose or a function has stopped working, for example it could be a broken float switch or a damaged spray arms can also cause leaks. These are simple to fix and it the case of replacing with a screwdriver.

Kitchen Hot Water:
If you find yourself not getting any hot water from the taps, it might be the case of where you need to upgrade your water heater. As small water heater is a common cause of inadequate hot water, a broken dip tube can also disrupt your hot water supply. The dip tube brings cold water to the bottom of the hot water tank for heating, to replace this and to solve this problem is to disconnect the cold water inlet and undo the pipe nipple.

Share This:

4 Common Plumbing Problems

4 Common Plumbing Problems

The routine of weekly house cleaning, paying your bills and grocery shopping is just something we doing on a weekly basis in maintaining this environment. Here are 4 Common Plumbing Problems.

As a homeowner you do your best to maintain your home so that you can live in a stress- free environment.

However you ever consider the problem you have could face within the inner working of your home that can disrupt this stress free environment? For example there the dripping the faucet in the sink, the toilet won’t flush and the boiler won’t heat up. These problems could be telling you something and more often than not we ignore or fail to see these small warning signs.

The Tap

There’s nothing worst to come home to discover you have no running water or the water pressure is very low.  Another problem could be the main water valve may be turned off, a burst pipes goes unnoticed which lead to extensive damage to your home.  Over the years, zinc will erode from galvanized pipes and this corrosion can build up over time causing lowered water pressure. If your tap drips, it could indicate that you need to replace the washers. If you have a lot of trouble turning off your taps you may need to replace the spindle or perhaps it is poorly greased or pitted.

The Toilet

When you try to flush the toilet, nothing happen? Does your toilet gurgle? When it does this, it could be an indication that there is a possible partial blockage within the plumbing system. Another problem could be if your toilet runs constantly, it could be telling you that it needs a new float or washers.

The Water or Gas Bills

Have you found your gas or water bill increased suddenly? This problem could be a hidden leak or possibly faucet that runs continuously. Take a look at your boiler or if it might the case of where you need a power flushing done to your system.

The Floorboard Puddles

Have you ever woken up one morning to find your floorboard to be soft and squishing to walk on? This is an issue to do with a blockage floor drain and can be a result from a variety of causes. This issue should be dealt with as soon as possible.

Share This:

Problematic plumbing Issue

Problematic plumbing Issue

My Washing Machine Won’t Drain
If your washing machine won’t drain, the problem is most likely in the drain hose or the pump.
Since the washing machine is filling up with water, you can rest assured that the motor is working correctly. And if your washing machine spins or runs through a cycle, then you can be sure that the belt is OK.
Since the washer fills and spins, the problem is probably the drain hose.
Be certain that the hose isn’t crimped or kinked.
Lift the washing machine lid and examine the tab that rests under the lid. This tab connects to a switch on the washing machine. If it is broken, the washing machine will turn off and won’t drain thoroughly.
If the tab is broken, you can try to fix it yourself, however, you may find that it is best to have a professional repair it for you.
If the problem isn’t in the lid switch or the drain hose, then the problem may be that the water pump is broken.
This will require the services of a professional plumber.
I Have Rattling Pipes. What Should I Do?
Rattling pipes are referred to as “water hammer”.
Water hammer occurs when the motion of water comes to an abrupt stop or suddenly the water changes direction of flow in your pipes.
The rattling noise can be stopped by insulating the pipe. Wrapping the pipe with a towel or blanket can be an effective way to control the rattling.
Water hammer can also be treated by recharging the water supply.
By recharging the water supply, the amount of air in the pipes is increased, which, in turn, causes the water to flow freely.
To recharge the water supply, turn off the main water supply valve, and then open all the faucets. When you turn on the main valve, begin shutting the faucets off, one at a time, beginning with the faucet that is lowest in the home.
If this doesn’t solve the problem, you need to contact a plumber.

Boiler Banging Noise: Know How to React
A boiler banging noise can be very disconcerting whether you are a new home owner or have lived in the house for a very long time. A banging noise from the boiler is not necessarily the first sign of a larger problem; however, it is a sign that your boiler system needs some attention. There are many reasons why your boiler or pipes will begin to make noises and the reason(s) why will need to be thoroughly investigated.
The number one reason why you will hear a boiler knocking sound is air build up in the system. Through the process of adding water to the system air will naturally accumulate in your boiler system and pipes. Find the bleeder (or pressure release) valve for your system and slowly let the air escape the system. You will probably hear a hissing noise as the air escapes the system. This should eliminate the banging sound if it is the sole cause of your problem.
Another issue that can lead to banging noises from your boiler is sediment build up in your system. As the sediment settles on the bottom of the tank, when the heating element begins to heat the water, it is blocked by the hard crust of sediment and this will lead to rapid heating of the water, which in turn, creates steam in the system and the banging noises that you are hearing.
Another cause of banging noises from your boiler is a faulty expansion tank or a fast closing zone valve. If either of these parts is not functioning properly they will either need to be repaired or replaced. Replacing or repairing a boiler expansion tank or zone valve is a job best left to a professional. If you believe that this is the cause of your problems, call a service technician to properly diagnose and repair your boiler system.

Share This: